Once you've got your CCNA, you're ready to move on to the next level, the Professional certifications. For years, Cisco had one Professional certification, the Cisco Certified Network Professional (CCNP) certification. Over time, Cisco has expanded this level of certifications to include the Cisco Certified Security Professional (CCSP) and Cisco Certified Voice Professional (CCVP).
With security [...]
The textbook definition of "administrative distance" is simple enough: "the measurement of a protocol's believability". It's not enough to know the definition, however you've got to know when AD comes into the picture and when it does not.
When a packet needs to be routed, the router looks in its routing table for the next-hop IP [...]
While studying to pass the BSCI exam and preparing to earn your CCNP certification, you'll quickly notice that while OSPF and ISIS are both link-state protocols, there are a lot of differences between the two. One major difference is the way the two protocols handle hello packets.
Hello packets are imperative to keeping OSPF and [...]
To pass the BSCI exam and earn your CCNP certification, you've got to master the (many) details of OSPF. You might have thought there were quite a few OSPF details in your CCNA studies, but you'll now build on that foundation on the way to earning your CCNP.
One such detail is the role of the [...]
Your BSCI and CCNP exam success depends on knowing the details, and one such detail is knowing the proper way to summarize routes in OSPF. Route summarization is not just a test of your binary conversion abilities, but knowing where and when to summarize routes. It will not surprise any CCNA or [...]
BSCI exam success, not to mention earning your CCNP, can come down to your OSPF route summarization skills. There are a few different commands and situations you need to be ready for, and one of these situations is the proper use of the "summary-address" command.
The summary-address command should be used on an ASBR in order [...]
To pass the BSCI exam and move one step closer to CCNP certification success, you've got to know how and when to use debug commands to troubleshoot and verify network operations. While you should never practice debug commands on a production network, it's important to get some hands-on experience with them and not rely on [...]
To pass the BSCI exam and become a CCNP, you have to be aware of the proper use of passive interfaces. You learned about passive interfaces in your CCNA studies, but here we'll review the basic concept and clear up one misconception regarding passive interfaces and OSPF.
Configuring an interface as passive will still allow [...]
OSPF is a major topic on both the CCNA and CCNP exams, and it's also the topic that requires the most attention to detail. Where dynamic routing protocols such as RIP and IGRP have only one router type, a look at a Cisco routing table shows several different OSPF route types.
R1#show ip route
Codes: C [...]
OSPF route redistribution is an important topic on the BSCI exam, and it's a topic full of details and defaults that you need to know for the exam room and the job. To help you pass the BSCI exam, here's a quick review of some of the OSPF route redistribution basics.
To see if a router [...]